DURA ORIGINAL HEAT MAT
Sold by the square metre. Roll is 1 metre wide.
- For heating cables 2-5mm
- Suitable for indoor use
- For crack free tiled floors
| Material: | Polypropylene Dimpled Sheet & Fleece |
| Crack Bridging: | 2mm |
| Mat Height: | 5mm |
| Heating Cable: | 2-5mm |
| Roll Width: | 100cm |
| Adhesive Tensile Strength: | 0.2 N/mm2 |
| Robinson Test: | Extra-heavy |
| Mat Colour: | Dimpled Sheet = Yellow, Fleece = White |
| Storage: | Upright with original packaging, in a dry place protected from sunlight. |
Q. Is Dura Original a copy of Durabase CI++ Matting?
A. No, Tile Rite have sold this same matting that is manufactured at ISOLA in Norway since 2008. ISOLA have been manufacturing this same mat for over 15 years. Dura Original, is is the same product with a new label and name DURA ORIGINAL.
Q. Can you use underfloor heating with DURA ORIGINAL Matting?
A. Yes, when installing underfloor heating with DURA ORIGINAL matting, it is recommended that you install the heating underneath the matting. The layering should be as follows: Concrete Sub Floor, Screed, Underfloor heating, DURA ORIGINAL Matting, Tiles. The DURA ORIGINAL Matting is manufactured to give good thermal conductivity and will evenly distribute the heat, DURA ORIGINAL ensures that movements in the screed caused by thermal fluctuations are balanced out reliably for years to come.
Q. What is DURA ORIGINAL For?
A. DURA ORIGINAL is for sheer stress protection. Sheer stresses develop whenever surfaces move. Movements can occur due to drying, shrinkage or thermal fluctuations in the screed, which can be caused by underfloor heating or problematic subfloors, for example. With the DURA ORIGINAL matting used as a stress alleviating intermediate layer, damaging shear stresses are absorbed by the special triple-layer mat structure, keeping tiled surfaces free of cracks.
Q. Is DURA ORIGINAL Waterproof?
A. In combination with tiling, DURA ORIGINAL matting acts as an additional seal that prevents water from seeping through. Associated accessories - internal and external corners, sealing collars and joint tape should be used for connecting and sealing butt joints.
Q. How do I lay DURA ORIGINAL?
A. Fix the DURA ORIGINAL matting (fleece layer at the bottom) to the subfloor using a powdered flexible tile adhesive (applied with a 4mm square notched trowel). Tape over the joints with sealing tape. Then press the flexible tile adhesive through the mesh into the depressions and spread across the entire area. Finally, scrape off the excess with a notched trowel and lay the tiles on the mat.
Novuna Finance - Including Interest free
Spread the cost with our buy now pay later finance or Interest free finance option available online with Novuna.
The By Now Pay Later option includes a 12 month deferral period, you can either pay the total loan amount interest free within 12 months (early settlement fee up to £29.00 would apply), or pay nothing for 12 months and then start the agreed payment plan of 48 or 60 monthly repayments.
Just add your tiles and tools to the shopping cart and, if your order is over £500, you will be able to use the Novuna Finance calculator to calculator the length and cost of the plan before applying.
For more information visit the Finance option page
Representative example:
- Cash Price £500
- Deposit £50
- Loan amount £450, 8.9% APR representative
- Interest rate 8.9% fixed
- Deferral Period of 12 Months followed by 48 monthly repayments of £12.01
- Total term of loan agreement 60 months
- Total charge for credit £126.48
- Total Amount payable £626.48
For orders over £1,000 Novuna offer an Interest free finance option
Representative example
- To pay a deposit of 10% £100.00
- 12 Monthly payments of £75.00
- 0.00% APR (representative)
- Finance Amount £900.00
- Total Amount Payable £1,000.00
Stock delivery times
Small orders delivered by courier will take 2-3 business days