Big Spin Deep Hurricane Level CAPS

100 x BIG SPIN HURRICANE CAPS

These are the CAPS only. The BASES are sold separately 

• 2 part system for perfect tile-to-tile alignment (100 x Level Caps)
• Designed for fitting large format Porcelain, Marble & Stone tiles.
• Use with Big Spin Hurricane & Big Spin Bases
• Interchangeable with our BIG SPIN level system
• For wall & floor tiles
  

Note bases can be reused so tilers will usually not order equal amounts of caps to bases.

View the whole range of the Hurricane Big Spin levelling system.

INSTRUCTIONS FOR USE:

1. Insert threaded spacer base beneath each exposed edge of tile, make sure there is contact between the spacer and the tile with no mortar in between.
2. Install the next tile tightly against the already positioned threaded spacer base. Slide the back and forth or use a rubber mallet to bed the tile into the mortar whilst releasing air trapped below.
3. Place the Big Spin cap on top of the threaded spacer base and spin the cap down to the tile surface. Turn cap as required until all adjacent surfaces are flush.
4. After the mortar is cured, the caps and threaded posts can be removed by kicking, using a rubber mallet or removal roller in the same direction as the grout joint.

Use this table as a guide to calculate the quantity you need based on the size of the tile chosen, and the square metres require to cover.

Example: tile that measures 100cm x 50cm = 12 spiner pieces per m2 required