Big Spin Hurricane PROTECTION PLATES

50 pcs x BIG SPIN HURRICANE LEVEL SYSTEM

The Protection plates are for polished and gloss tiles. To stop the caps from spinning onto the tile surface and scratching.

This is the PROTECION PLATES only BASE & CAPS are sold separately 

• Use with Big Spin Hurricane & Big spin Caps
• Protects Tiles From Scratching
• Quick & Easy To Use
• 100% Reusable
• For wall & floor tiles
  
• 50 pcs to a pot

View the whole range of the Hurricane Big Spin levelling system.

INSTRUCTIONS FOR USE:

1. Insert threaded spacer base beneath each exposed edge of tile, make sure there is contact between the spacer and the tile with no mortar in between.
2. Install the next tile tightly against the already positioned threaded spacer base. Slide the back and forth or use a rubber mallet to bed the tile into the mortar whilst releasing air trapped below.
3. Place the Big Spin PROTECTION PLATES on top of the tile surface, through the threaded spacer base and spin the cap down to the protection plate sat on the tile surface. Turn cap as required until all adjacent surfaces are flush.
4. After the mortar is cured, the caps and threaded posts can be removed by kicking, using a rubber mallet or removal roller in the same direction as the grout joint.