Image of Bal 10Ltr White Star Plus Wall tile Adhesive-Adhesive-Bal-Tile.co.uk

Bal 15kg Green Star Wall tile Adhesive

Name: Bal 15kg Green Star Wall tile Adhesive
Brand: Bal
SKU: B111821
Price: 13.99 GBP
Availability: InStock

£13.99

Tax included. Shipping calculated at checkout.

In stock, ready to be shipped

Quantity

For ceramic wall tiles only — not suitable for porcelain tiles. For porcelain tiles or tiles larger than 300×300mm, use BAL White Star Plus instead.

A ready-mixed, non-slip wall tile adhesive for ceramic tiles up to 300×300mm, mosaics, and most porous natural stone. Suitable for domestic bathrooms, kitchens, showers, and splashbacks — both dry and wet interior environments. The 30-minute extended open time lets you work comfortably across larger sections without rushing.

Pack size

15kg

Coverage

5–6m²

Open time

>30 mins

Grout after

24 hrs

Max bed depth

3mm

Shelf life

12 months

Works with

Ceramic tiles (up to 300×300mm)

Mosaics

Porous natural stone

Metro & subway tiles

Brick slips

Not suitable for

Porcelain tiles (any size)

Tiles larger than 300×300mm

Non-porous / vitrified tiles

Floor tiles

Exterior use

How to apply this adhesive Surface prep · setting out · fixing · grouting

Before you start

Prepare the surface — it must be flat (max 3mm deviation over a 2m straight edge), clean, dry, and free from dust or loose material.

New plaster or cement render: allow at least 4 weeks to cure before tiling.

In showers and wet rooms, apply a tanking system (e.g. BAL Tank It) to waterproof the background before tiling.

In wet areas, leave adhesive to dry for a minimum of 3 days before grouting.

Mark a true horizontal datum line one tile height up from your floor or bath edge using a spirit level. Fix a timber batten along this line as a temporary ledge.

Find your vertical centre — measure the wall width and dry-lay a row of tiles out from the centre to check cut sizes at both edges. Adjust so cuts are even and at least half a tile wide.

Fixing & finishing

Apply adhesive with a notched trowel — round notched for dry walls, thin bed solid bed for wet walls. Comb in one direction. Work in 1m² sections to avoid skinning.

Max bed depth: 3mm. Open time: >30 minutes at 20°C.

Press each tile firmly into place with a slight twisting action. Occasionally lift a tile to check contact — minimum 50% coverage in dry areas; 100% solid bed (no voids) in wet areas.

Clean surplus adhesive from tile faces and joints immediately with a damp cloth before it dries. Leave movement joints at all internal corners and wall junctions.

Grout after 24 hours at 20°C (3 days in wet areas or on impervious backgrounds). Seal bath and shower tray edges with a compatible silicone.

Do not use the shower for at least 2 weeks after grouting (BS 5385: Part 4).

Technical data sheet (PDF) Safety data sheet (PDF)