Genesis Brushed Brass Straight Edge Solid Brass Tile Trim
£25.50
Tax included.
Shipping calculated at checkout.
Special order item: 3-5 days
Quantity
The Genesis EPB Solid Brass Tile Trim in Brushed Brass is machined from solid brass bar stock and finished with a fine-grain brushed texture that gives a warm, tactile quality to exposed tile edges. Unlike aluminium trims, solid brass has genuine weight and thickness — the 1.5mm wall is appreciably more substantial than anodised aluminium, and the brushed finish has depth that catches light differently depending on the viewing angle. Suited to high-quality tile installations where the trim is itself a considered design element. Available in 8mm, 10mm, and 12mm depths, 2.5m lengths.
Solid brass — not anodised aluminium
2.5m length
Sizes: 8mm, 10mm, 12mm
Wall & floor use
1.5mm wall thickness
Brushed brass finish
Material
Solid Brass
Length
2.5m
per length
Profile depth (D)
8 / 10 / 12mm
Wall thickness
1.5mm
Finish
Brushed Brass
solid brass
Brand
Genesis
Application
Walls & floors
floor rated
Range
EPB
Suitable for
Wall and floor tile edge finishing
High-quality and designer tile installations
Matching brushed brass fixtures and fittings
Internal installations
Not suitable for
External / outdoor use without specialist lacquering
Abrasive cleaning — will scratch the brushed finish
Submerged or permanently wet applications
Brushed brass vs polished brass — which should I choose?
Choose brushed brass when
A warm, contemporary finish is preferred — brushed brass has a softer look than polished
Matching brushed or satin brass taps, handles, or accessories
Fingerprints and minor marks are less visible on a brushed surface
Choose polished brass when
A high-shine, reflective gold finish is the goal
Matching polished brass or chrome-effect gold fittings
A more traditional or opulent scheme is intended
How to fit & cut solid brass tile trim
Cutting to length
1
Measure and mark the trim length required. Always measure twice.
Solid brass is heavier than aluminium — support both ends when cutting to prevent flexing.
2
Cut with a fine-tooth mitre saw with a metal-cutting blade rated for brass.
Brass work-hardens quickly — use sharp blades and appropriate cutting speed. Do not use wood saw blades.
3
For external corners, mitre each piece at 45°. Deburr cut edges with a fine metal file.
Fitting the trim
1
Dry-fit in position before applying adhesive. Trim depth should be 1.5–2.0mm greater than the tile.
The weight of solid brass means mechanical fixing with additional screws or clips is recommended for large spans.
2
Bed the fixing tab into tile adhesive and press firmly along the full length.
3
Embed tiles flush with the profile. Clean the brass face immediately.
Remove all adhesive and grout from the face immediately — cementitious residue will stain the brass if left to set.
4
Grout and wipe the trim face before grout sets.
Downloads
Technical datasheet
Delivery Service
Genesis Brushed Brass Straight Edge Solid Brass Tile Trim
8mm
£25.50
Free delivery on orders over £399
Free delivery on orders over £399
Free delivery on orders over £399
Free delivery on orders over £399
Free delivery on orders over £399
Free delivery on orders over £399
Free delivery on orders over £399
Free delivery on orders over £399
Free delivery on orders over £399
Free delivery on orders over £399
