Grout colour 30: Sandstone
£19.99
VAT included.
Delivery calculated at checkout.
Special order item: 3-5 days
Joint width2–20mm
Use within25 min
Walk on it8 hrs
Grout Calculator
Calculate how much grout you need for your project
Quantity
Description
Kerakoll Fugabella Color 30 Sandstone – wall and floor grout.
Colour: 30 Sandstone. 3kg bag.
Kerakoll Fugabella Color Resin-Cement High Flexibility Rapid Wall & Floor Tile Grout is a high-performance grout designed for superior results. Its groundbreaking hybrid formula is suitable for porcelain, ceramic tiles, mosaic and natural stone, offering water repellence, low water absorption, high surface hardness, and resistance to acidic substances. Joints of 0-20 mm are grouted with a smooth finish and a high degree of hardness, creating a water-repellency with water-drop effect.
Materials to be Grouted:
- Porcelain and Ceramic tiles
- natural stone
- glass and ceramic mosaics
Intended Use:
- Internal and External floors and walls
- Domestic, commercial and industrial applications
- Suitable for areas subject to thermal shock and freezing
- Swimming Pools, tanks and fountains
- Use with underfloor heating systems
TECHNICAL DATA:
Appearance: Coloured pre-mixed
Apparent volumetric mass: ≈ 1.22kg/dm³ UEAtc/CSTB 2435
Average granulometric composition: ≈ 70 µm
Mixing water: 3kg bag≈ 0.7 l / 1 bag 3kg
Shelf life: 3kg bag: ≈ 24 months in the original packaging in dry environment
Specific weight of the mixture: ≈ 1.86 kg/dm³ UNI 7121
Pot life: ≥ 50 min.
Temperature range for application: from +5°C to +35°C
Width of joints: from 0 to 20mm
Grouting after laying:
- with adhesive: see characteristics of adhesive
- mortar: ≈ 7 – 14 days
Foot traffic: ≈ 3 hrs
Foot traffic at +5°C: ≈ 10 hrs
Foot traffic at +35°C: ≈ 2 hrs
Interval before normal use: ≈ 24 hrs
Ready for use at +5°C: ≈ 3 days
Ready for use at +35°C: ≈ 8 hrs
Ready for use in swimming pools: ≈ 3 days
COVERAGE: depends on the size of the tiles and joints. Please use the grout calculator to work out the amount of grout required for your tiling.
For the Application and Instruction Sheet here
And the Data sheet here
Delivery Service
Grout colour 30: Sandstone
£19.99
From mixing to finished floor
How long Kerakoll Fugabella Color gives you at each stage, at 23°C. Cold slows it down, heat speeds it up.
- 25 min Use the mix within60 min at 5°C · 10 min at 30°C
- Touch dry Start cleaningDamp sponge, clean water
- 8 hrs Walk on it12 hrs at 5°C
- 18 hrs Normal use12–24 hrs depending on temperature
- 3 days Fill a poolSwimming pools and tanks
Only mix what you can use in 25 minutes. Don’t add more water once it starts to stiffen, and use the same amount of water in every mix – extra water weakens the grout and changes the shade.
Use it for
- Porcelain, ceramic and low-thickness slabs
- Klinker, cotto and terracotta
- Glass and ceramic mosaic
- Natural stone, marble and recomposed stone
- Walls and floors, indoors and outdoors, including heavy traffic
- Swimming pools, tanks and fountains
- Underfloor heating
Don't use it for
- Joints narrower than 2mm or wider than 20mm
- Expansion and movement joints – use a flexible sealant
- Substrates that flex heavily, aren’t fully dry, or have rising damp
- Areas needing specific chemical resistance or zero water absorption
How to grout
-
Prepare the joints
Wait for the adhesive to cure (7–14 days on mortar beds). Joints must be clean of adhesive and at least ⅔ of the tile thickness deep. Use bags from the same batch.
-
Mix
Pour about ¾ of the water into a clean tub (about 0.8 litres per 3kg bag in total), add the powder and mix with a slow paddle. Add the rest of the water until smooth.
-
Apply
Work diagonally across the joints with a rubber float, filling them completely. Remove the excess straight away, leaving only a thin film.
-
Clean
When the grout is touch-dry, clean with a large damp sponge and clean water. Finish by drawing the sponge diagonally across the tiles.
-
Protect
Keep it out of rain and direct sun for 12 hours. On porous tiles or hot days, dampen the surface first and mix with cold water.
-
Test contrasting colours
Grouting a dark colour into light tiles, or the other way round? Try it on a spare tile first to check it cleans off.
| Mixing water | ≈ 0.8 l per 3kg bag |
|---|---|
| Pot life | ≥ 60 min at 5°C · ≥ 25 min at 23°C · ≥ 10 min at 30°C |
| Application temperature | +5°C to +30°C |
| Joint width | 2–20mm |
| Foot traffic | ≈ 8 hrs (≈ 12 hrs at 5°C) |
| Ready for use | ≈ 18 hrs · ≈ 24 hrs at 5°C · ≈ 12 hrs at 30°C |
| Swimming pools | ≈ 3 days |
| Working range once cured | −40°C to +90°C |
| Water absorption | ≤ 2g after 30 min (ISO 13007-4.2) |
| Mould and bacteria | Mould resistant · antibacterial class B+ |
| Shelf life | ≈ 24 months from production, sealed and dry |
| Standards | CG2 WA (ISO 13007-3) · meets ANSI 118.7 · EC1 Plus very low emissions |
Values at +23°C and 50% relative humidity. Site conditions will vary.
You'll Also Need
Everything to mix, apply and clean up
