Skip to content
Free delivery on orders over £500
Free delivery on orders over £500

10x36cm Black Slate Split Face tile

SKU L038647
We currently have 1 m2 in stock.
£58.80 m2
Original price £2.10 - Original price £2.10
Original price
£2.10 tile
£2.10 - £2.10
Current price £2.10 tile

Request a free Sample tile before ordering If the tile is large in size you will receive an off cut approx 10x10cm.
If you request more than 3 different tiles you will be charged a postage and packaging rate.

Split face tiles made of black slate.

An interlocking natural stone tile of black slate with a natural matt finish and riven texture. Stone imitation cladding tile.

The Slate Black Split Face is a tile suitable for fire hearths and as an outdoor wall tile. Alternatively, it makes a beautiful kitchen splash back or bathroom feature wall.

Also available in Oyster slate, Grey/white Mix and White sparkle quartz.

SEAL: Natural products must always be sealed to protect them from staining and corrosion. All natural stones are porous with numerous capillaries running through, allowing liquids to be absorbed into the surface. Sealing prevents this absorption and is done after fixing the tiles with adhesive.

Different types of sealers produce different finishes for slate (gloss/natural/colour intensifier).

Natural stone should be sealed using a natural stone tile sealer.

No grouting required for these tiles.

The adhesive we recommend for split face tiles is Norcros White Rapid Porcelain & Stone Tile Adhesive. This can be used for walls and fire surrounds so no need to worry about the heat of your fire or wet environments in the bathroom. We recommend white adhesive as dark adhesive can stain natural stone tiles.

Price per Sq. Metre £58.80
Dimensions 100x360 mm 
Thickness 8-12 mm
Tiles per sq. metre 28  
Tiles per box 8  
Coverage per box 0.28 m2 
Material Slate
Colour Black  
Finish Matt
Texture Riven  
Wall or Floor tile Wall Tile  
Area Indoor/outdoor
Glazed ⓘ The coat of enamel or liquid glass that is applied to ceramic and porcelain tiles. Glazed tiles are non-absorbent so do not require sealing. No
Requires Sealing ⓘ unglazed tiles will absorb liquid, which will lead to staining. Thus it’s necessary to apply a protective sealant to unglazed tiles. Yes
Frost proof ⓘ Different types of floor tiles have different water absorption rates. porcelain tiles are engineered to be frost proof in temperatures below zero as they don’t absorb water (non porous). Yes
Rectified edge ⓘ Has been mechanically cut or ground down to an exact size. The edges are usually precisely cut at a square 90-degree angle. No
Fire hearths / surround Yes
Supplier Crocodile
Manufacture Code WP-SZ103601